Jump to content

MAC Address Filtering on a Linksys BEFW11S4


Bruceleeon
 Share

Recommended Posts

1. From the "Setup" page, click Advanced

2. When the "Filters" page opens, click on the Wireless tab

3. Make sure all wireless computers are setup to the router, and are currently able to access the internet. Once this is done, click on the Active MAC Table button.

4. Move the "Wireless Active MAC Table" window and click on Edit MAC Filter Settings on the main window.

5. When the "Wireless Group MAC Table" opens, go to the task bar and click on the Wireless Active MAC Table so that window appears.

6. With the two windows side by side enter the MAC Addresses from the "Wireless Active MAC Table" window into the Wireless Group MAC Table.

Note: When you enter the MAC Addresses do not include the dashes/semi-colon, and do not click "Filter"

7. Click Apply then Continue in the "Wireless Group MAC Table" window.

8. Close the "Wireless Group MAC Table" window and the "Wireless Active MAC Table" window

9. On the Main window Enable the Station MAC Filter setting.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...